BimmerFlasher

Application that allows you to perform fast and easy ECU flashing and diagnostic operations without PC.
Features:
Read and write calibration (All supported ECUs)
Read and write full (ME7.2, MS41, MS42, MS43, MS45, MSV70, MSV80)
Read software version and other IDs (All supported ECUs)
Read error codes (All supported ECUs)
Clear error codes (All supported ECUs)
Reset adaptation (ME7.2, MS41, MS42, MS43, MS45, MSV70, MSV80)
Read live data (ME7.2, MS41, MS42, MS43, MS45, MSV70, MSV80)

Free version allows you to read ECU calibration data, read ECU error codes and read ECU live data. Reading full, writing or clearing engine error codes require one time module unlocking.

To pair a phone and a car, you need to have a good K+DCan USB cable and USB-OTG adapter.

Supported ECUs :
Bosch ME7.2
Siemens MS41 (MS41.0, MS41.2, MS41.2)
Siemens MS42
Siemens MS43
Siemens MS45 (MS45.0, MS45.1)
Siemens MSV70
Siemens MSV80 (MSV80, MSV80.0, MSV80.1)
Siemens MSS50 (MSS50.0, MSS50.1)

Recent changes:
Added a new module for Siemens MSV80.
Added communication protocol for Siemens MS45 via CAN bus.
Added calculation for MO3 checksums for MS45.
Added compatibility checks before writing, for all modules except ME7.2 and MSS50.
Improved writing speed for MS41, MS42 and MS43.
Last used module will be pre-selected in the carousel for next usage.
Changed hold duration for operation cancel to 500ms.
Other improvements for modules.
Stability and UX improvements.
Updated FTDI driver library.