BumpRecorder
by BumpRecorder.com
It measure the road roughness for pavement maintenance management.
| App Name | BumpRecorder |
|---|---|
| Developer | BumpRecorder.com |
| Category | Maps & Navigation |
| Download Size | 4 MB |
| Latest Version | 5.5.3 |
| Average Rating | 3.33 |
| Rating Count | 27 |
| Google Play | Download |
| AppBrain | Download BumpRecorder Android app |
Major Version Up (4.5)
- Add Functions : Data auto upload, Data auto delete. Delete data are uploaded data and too short data.
- Improve Functions : Add graphical display on [Graph] tab for GPS accuracy.
- Bug Fix : App was quit when long recording on [Navi] tab.
Outline
Using this application, only the smartphone put on the vehicle dashboard, road bump can be detected. It can use for road maintenance in usual time, and earthquake damege research after the disaster.
When the recorded file is uploaded, road bump location map can be displayed by following URL by on your browser. http://smartprobe.org/bumprecorder/
If you want to contact us. : Twitter @BumpRecorder
How to use?
1. The smartphone put on the vehicle dashboard on horizontally or vertically, don't put on diagonally. [attention!!] We are strongly
recommend you, the smartphone should fix on the dashboard for your safety.
2. Press [REC] button, then road bump detection will be started. The vehicle is driven as usual.
3. Road bump size is displayed on the screen. [attention!!] DON'T look at the screen, when you drive the vehicle for your safety!
4. When measurement is finished, press [REC] button.
5. For upload files, press [Upload and Share] button at the screen of right top side, and select file, then upload will be start. It
takes few moments.
6. Then the driving route, the bump location will be displayed on the Google Maps. Circle diameter is defined by road bump size.
About data files
data files as follows. When upload will be done, these files will be uploaded.
- config file : yyyymmdd_hhmmss_Config.txt
measurement condition : start time, end time, measurement cycle, device name, etc
NOT include serial number
- acceleration data file : yyyymmdd_hhmmss_Accel.txt
acceleration data, road profile, etc
- GPS data file : yyyymmdd_hhmmss_GPS.txt
GPS information
- Bump data file : yyyymmdd_hhmmss_Bump.txt
Bump Height, Bump Length, etc
- Cell tower data file : yyyymmdd_hhmmss_CellInfo.txt
MCC, MNC, LAC, RNC, Cell-ID, etc
NOT include phone number
Twitter ID : @BumpRecorder
Recent changes:
5.5.3 SDK update, bug fix
5.5.1 Required OS ver is 7.1.1 or later, bug fix
5.4.2 bug fix
5.4 re-new for OS13
5.3 re-new for OS11, bug fix
1) Fix for some phone can not record data. When it fail recording to Documents/BumpRecorder, to Android/data/jp.traffichazard.BumpRecorder/files instead.
2) Fix map disappear on [Navi] tab.
3) Delete "Measurement control by power supply" menu on [Setting] tab for OS8 or later.
- Add Functions : Data auto upload, Data auto delete. Delete data are uploaded data and too short data.
- Improve Functions : Add graphical display on [Graph] tab for GPS accuracy.
- Bug Fix : App was quit when long recording on [Navi] tab.
Outline
Using this application, only the smartphone put on the vehicle dashboard, road bump can be detected. It can use for road maintenance in usual time, and earthquake damege research after the disaster.
When the recorded file is uploaded, road bump location map can be displayed by following URL by on your browser. http://smartprobe.org/bumprecorder/
If you want to contact us. : Twitter @BumpRecorder
How to use?
1. The smartphone put on the vehicle dashboard on horizontally or vertically, don't put on diagonally. [attention!!] We are strongly
recommend you, the smartphone should fix on the dashboard for your safety.
2. Press [REC] button, then road bump detection will be started. The vehicle is driven as usual.
3. Road bump size is displayed on the screen. [attention!!] DON'T look at the screen, when you drive the vehicle for your safety!
4. When measurement is finished, press [REC] button.
5. For upload files, press [Upload and Share] button at the screen of right top side, and select file, then upload will be start. It
takes few moments.
6. Then the driving route, the bump location will be displayed on the Google Maps. Circle diameter is defined by road bump size.
About data files
data files as follows. When upload will be done, these files will be uploaded.
- config file : yyyymmdd_hhmmss_Config.txt
measurement condition : start time, end time, measurement cycle, device name, etc
NOT include serial number
- acceleration data file : yyyymmdd_hhmmss_Accel.txt
acceleration data, road profile, etc
- GPS data file : yyyymmdd_hhmmss_GPS.txt
GPS information
- Bump data file : yyyymmdd_hhmmss_Bump.txt
Bump Height, Bump Length, etc
- Cell tower data file : yyyymmdd_hhmmss_CellInfo.txt
MCC, MNC, LAC, RNC, Cell-ID, etc
NOT include phone number
Twitter ID : @BumpRecorder
Recent changes:
5.5.3 SDK update, bug fix
5.5.1 Required OS ver is 7.1.1 or later, bug fix
5.4.2 bug fix
5.4 re-new for OS13
5.3 re-new for OS11, bug fix
1) Fix for some phone can not record data. When it fail recording to Documents/BumpRecorder, to Android/data/jp.traffichazard.BumpRecorder/files instead.
2) Fix map disappear on [Navi] tab.
3) Delete "Measurement control by power supply" menu on [Setting] tab for OS8 or later.
