DoNfc - NFC Reader & Creater

About:

Welcome to DOINFOTECH.COM
Application Name: DoNfc - NFC Tag Reader & Creater App.
Version: V4.0

User Guide:

By installing DoNFC application, it is assumed that you are accepting all terms and condition of company DOINFOTECH.
Make sure you mobile supports NFC. Launch DoNFC application and bring the NFC TAG near to your smart phone.(Mostly back side of you phone, please refer you phone user manual to identify the NFC antenna location).

About Application:
It can be widely used for IoT (INTERNET OF THINGS) use cases.
DoNFC is a simple and neat application that helps to read/write the detailed information from/to the NFC tags, virtual-tag created by Host Card Emulation mode and High Frequency RFID Tags.

Have you ever wondered if you unknowingly carry the NFC-enabled cards in your wallet? or have you ever tried to read the data from your company ID card or NFC business card? Use DoNFC with your NFC-enabled Android device to find them and to check what information they carry.

The DoNFC application reads Meta information and data from NFC / High Frequency RFID tags/ NFC Smart Card. It is an ideal app/tool for anyone who is curious about the information stored on their Near Field Communication tags / NFC Smart cards.

Details view of DoNFC information:

Once NFC tag is detected with in the proximity range, then below information will be shown in our application.

1. Manufacturer
2. Technology Supported
• Tag ID
• Technology
3. Tag Information
• ATAQ
• SAK
4. Tag Type
• Tag Size
• Maximum Transceive Length
• Maximum Transceive Time-out
• Memory Size
5. NDEF Details
• Type
• NFC data set access
• Current message size
• Maximum message size
6. Record Details
• Type Name Format
• Record Field
• Record Type
• Payload Length
7. Payload Data

Supported Tag Types* :
DoNFC application supports most of the NFC cards which follows NFC Forum standard.

1. Supports Tag-1 Type:
ISO14443A and A standard * read and re-write capable – user configurable as read only * Memory 96 bytes - expandable up to 2 kbyte * 106 kbit/s Speed *
Example: Innovision Topaz

2. Supports Tag-2 Type:
ISO14443A and F standard * read and re-write capable – user configurable as read only * Memory 48 bytes - expandable up to 2 kbyte * 106 kbit/s. *
Example: NXP Mifare Ultralight, NXP Mifare Ultralight

3. Supports Tag-3 Type:
Sony FeliCa system F standard and (JIS) X 6319-4 * 2 kbyte * 212 kbit/s *
Example: Sony Felica

4. Supports Tag-4 Type:
ISO14443A and A & B standard * read / re-writable, or read-only * 32 kbytes * 106 kbit/s and 424 kbit/s. *
Example: NXP DESfire, NXP SmartMX with JCOP

5. Supports Tag-5 Type:
ISO14443B-3 standard / ISO/IEC 15693 * 106 or 424 Kbits/s speed *

6. Supports H.F RFiD Type tags.

7. Supports Dynamic NFC Tags by NXP, ST, and PANASONIC etc Eg: NTAG I2C Plus, M24LR, M24SR, MN63Y12xx series etc.

Privacy Policy:
-----------------------
DoNFC does not store the data retrieved from tags on persistent memory without explicit user consent.
DoNFC does not transmit data retrieved from tags across the Internet.
DoNFC is thoroughly tested with multiple tags.

About DOINFOTECH:
DOINFOTECH is the embedded system based start-up and specialized in NFC / QR / BARCODE / BEACON related technologies.

For more details, please visit our website www.doinfotech.com or contact us [email protected].

Our social links: https://www.facebook.com/doinfotech ; https://www.twitter.com/doinfotech ; https://www.linkedin.com/in/doinfotech/

Recent changes:
DoNfc app updated