J-Tech Digital HDMI N2N Matrix

#Latest Network Switch Firmware Required to use the app

J-Tech Digital ® is focused on providing high-quality products that integrate and distribute home entertainment for the residential and commercial markets. J-Tech Digital ® has played a major role in transforming whole-house audio/video and home theater.

Three Woking modes
Three modes includes point-to-point, point-to-many & many-to-many. For point-to-point mode, HDMI signal can be extended up to 120m (394ft) over a single Cat5E/6 cable.

Any-to-Any Broadcasting
Extend your HDMI signal from any source to any receiver can never be too easy. By configuring J-Tech Digital customised gigabit network switch (JTECH-EX-120M-UN-S), you can stream your HDMI signal to one receiver or many receivers; also, receiver can pick the signal from any of the transmitters. The network switch can be cascaded to form a many-layer network to support a large HDMI extender system.

Standard TCP/IP Protocol
HDMI signal is repacked into IP packets. Each receiver and transmitter has a unique IP address which you can manually set by logging into their web GUIs.

Firmware can be downloaded from the product page:
https://www.jtechdigital.com/j-tech-digital-r-proav-r-unlimited-n-x-n-hdmi-extender-matrix-switch-switcher-extender-by-single-ethernet-cable-up-to-400ft-network-switch.html

Feel free to reach us to make suggestions:
Author: Shitao Wu
E-mail: [email protected]